Our goal is to deliver the correct size the first time. Please order a measured size, rather than use pants size. We will build the inner and outer belts to tighten 1.5-2" and lengthen 6-7" from the measurement that you order. This adjustment range is usually enough to accommodate winter weight and a slight drop in weight.
Pants size is unreliable because it will vary by manufacturer, and will usually be smaller than your actual waist measurement by 3-4". It is also best to measure over anything that will be worn under the belt, such as an inner belt, regular pants belt, or padding. Belts will usually add .5-1.5"; padding can add 2-3"+ depending on thickness.
If you order the wrong size, we will help you get the correct size and can help accommodate special sizing.
Belt Sizing
This table tells you the adjustment range on Small, Medium, Large, and Extra Large belts. It also tells you the length of the belt pad that will be on an Alpha, Delta, or Bravo belt.
AttackPAK Size
Adjustment Range
Belt Pad Length
SM: Small
27" to 32.5"
26"
MD: Medium
31" to 36.5"
30"
LG: Large
35" to 40.5"
33"
XL: Xtra Large
39" to 44.5"
36"
XX: 2 Xtra Large
43" to 48.5"
40"
Custom or Over 48"
Made for you
Made for you
Use a string and tape measure, or measure your belt from the end of the buckle to the hole that you use
C7 is the bony part of your spine at the back of your neck, just above your shoulders. Stand straight and drop the tape down your back to the floor
Iliac Crest to the floor
Place your hands on your hipbones with your thumbs pointing back toward your spine and your fingers wrapping forward. Hold your hands out parallel to the floor and drop the tape from your hands to the floor
Most of our packs have 4" of adjustment in harness height, but our lightweight Paladin pack for competition shooters eliminates adjustment to save weight. Order with the confidence that we will communicate to get you custom fitted.
AttackPAK 
